Quantify Deprecated Code Suggestions¶
See also
Download the notebook: deprecated.ipynb
As of quantify-scheduler==0.10.0, deprecation warnings are shown by default (as FutureWarning).
Compilation Setup¶
from quantify_core.data import handling as dh
from quantify_core.measurement.control import MeasurementControl
from quantify_scheduler.instrument_coordinator import InstrumentCoordinator
from quantify_scheduler.instrument_coordinator.components.qblox import ClusterComponent
from qblox_instruments import Cluster, ClusterType
from qcodes import Instrument
dh.set_datadir(dh.default_datadir())
Instrument.close_all()
meas_ctrl = MeasurementControl("meas_ctrl")
ic = InstrumentCoordinator("ic")
cluster = Cluster(
"cluster",
dummy_cfg={
1: ClusterType.CLUSTER_QRM_RF,
},
)
ic_cluster = ClusterComponent(cluster)
ic.add_component(ic_cluster)
# Always picks the first module of a certain type, and ignores the others of same type!
qcm_rf, qrm_rf, qcm, qrm = [None] * 4
for module in cluster.modules:
try:
if module.is_rf_type:
if module.is_qcm_type:
if qcm_rf is None:
qcm_rf = module
else:
if qrm_rf is None:
qrm_rf = module
else:
if module.is_qcm_type:
if qcm is None:
qcm = module
else:
if qrm is None:
qrm = module
except KeyError:
continue
print(f"qcm => {qcm}\nqrm => {qrm}\nqcm_rf => {qcm_rf}\nqrm_rf => {qrm_rf}")
Data will be saved in:
/home/slavoutich/quantify-data
qcm => None
qrm => None
qcm_rf => None
qrm_rf => <QcmQrm: cluster_module1 of Cluster: cluster>
from quantify_scheduler.device_under_test.quantum_device import QuantumDevice
from quantify_scheduler.device_under_test.transmon_element import BasicTransmonElement
q0 = BasicTransmonElement("q0")
quantum_device = QuantumDevice("quantum_device")
quantum_device.add_element(q0)
quantum_device.instr_measurement_control(meas_ctrl.name)
quantum_device.instr_instrument_coordinator(ic.name)
q0.clock_freqs.f01(7.3e9)
q0.clock_freqs.f12(7.0e9)
q0.clock_freqs.readout(8.2e9)
q0.measure.acq_delay(100e-9)
q0.measure.acq_channel(0)
q0.measure.pulse_amp(0.2)
device_cfg = quantum_device.generate_device_config()
hardware_cfg = {
"backend": "quantify_scheduler.backends.qblox_backend.hardware_compile",
"cluster": {
"ref": "internal",
"instrument_type": "Cluster",
f"cluster_module{qrm_rf.slot_idx}": {
"instrument_type": "QRM_RF",
"complex_output_0": {
"lo_freq": 2e9,
"portclock_configs": [
{
"port": "q0:res",
"clock": "q0.ro",
},
],
},
},
},
}
from quantify_scheduler import Schedule
from quantify_scheduler.operations.gate_library import Measure, Reset
from quantify_scheduler.operations.pulse_library import DRAGPulse
from quantify_scheduler.resources import ClockResource
def simple_trace_sched(
repetitions: int,
pulse_amp: float = 0.2,
) -> Schedule:
sched = Schedule("Simple trace schedule", repetitions)
port = "q0:res"
clock = "q0.ro"
sched.add(Reset("q0"))
sched.add(Measure("q0", acq_index=0, acq_protocol="Trace"))
sched.add(
DRAGPulse(
G_amp=pulse_amp,
D_amp=0,
phase=0,
duration=160e-9,
port=port,
clock=clock,
)
)
return sched
sched = simple_trace_sched(repetitions=1)
1. Qcompile => SerialCompiler¶
First, run Compilation Setup.
from quantify_scheduler.compilation import qcompile
compiled_schedule = qcompile(sched, device_cfg, hardware_cfg)
/tmp/ipykernel_23681/1962686608.py:3: FutureWarning: Function quantify_scheduler.compilation.qcompile() is deprecated and will be removed in quantify-scheduler-0.9.0. Use the `QuantifyCompiler.compile` method instead. See the user guide section on compilers for details.
compiled_schedule = qcompile(sched, device_cfg, hardware_cfg)
from quantify_scheduler.backends.graph_compilation import SerialCompiler
quantum_device.hardware_config(hardware_cfg)
compiler = SerialCompiler(name="compiler")
compiled_schedule = compiler.compile(
schedule=sched, config=quantum_device.generate_compilation_config()
)
compiled_schedule.timing_table
| waveform_op_id | port | clock | is_acquisition | abs_time | duration | operation | wf_idx | |
|---|---|---|---|---|---|---|---|---|
| 0 | Reset('q0')_p_0 | None | cl0.baseband | False | 0.0 ns | 200,000.0 ns | Reset('q0') | 0 |
| 1 | Measure('q0', acq_index=0, acq_protocol="Trace", bin_mode=None)_p_0 | None | q0.ro | False | 200,000.0 ns | 0.0 ns | Measure('q0', acq_index=0, acq_protocol="Trace", bin_mode=None) | 0 |
| 2 | Measure('q0', acq_index=0, acq_protocol="Trace", bin_mode=None)_p_1 | q0:res | q0.ro | False | 200,000.0 ns | 300.0 ns | Measure('q0', acq_index=0, acq_protocol="Trace", bin_mode=None) | 1 |
| 3 | Measure('q0', acq_index=0, acq_protocol="Trace", bin_mode=None)_acq_0 | q0:res | q0.ro | True | 200,100.0 ns | 1,000.0 ns | Measure('q0', acq_index=0, acq_protocol="Trace", bin_mode=None) | 0 |
| 4 | DRAGPulse(G_amp=0.2,D_amp=0,phase=0,clock='q0.ro',duration=1.6e-07,port='q0:res',t0=0)_p_0 | q0:res | q0.ro | False | 201,100.0 ns | 160.0 ns | DRAGPulse(G_amp=0.2,D_amp=0,phase=0,clock='q0.ro',duration=1.6e-07,port='q0:res',t0=0) | 0 |
2. Qblox Hardware Configuration¶
seqx=>portclock_configslatency_correction=> standalone/top-levellatency_correctionsline_gain_dbremoved
depr_hardware_cfg = {
"backend": "quantify_scheduler.backends.qblox_backend.hardware_compile",
"cluster": {
"ref": "internal",
"instrument_type": "Cluster",
"cluster_module1": {
"instrument_type": "QRM_RF",
"complex_output_0": {
"line_gain_db": 0,
"seq0": {
"port": "q6:res",
"clock": "q6.ro",
"latency_correction": 4e-9,
},
"seq1": {
"port": "q1:res",
"clock": "q1.ro",
},
},
},
},
}
from quantify_scheduler.backends.qblox.helpers import (
convert_hw_config_to_portclock_configs_spec,
)
new_hardware_cfg = convert_hw_config_to_portclock_configs_spec(depr_hardware_cfg)
fnc = lambda sub: {
key1: fnc(val1) if isinstance(val1, dict) else val1
for key1, val1 in sub.items()
if key1 != "line_gain_db"
}
new_hardware_cfg = fnc(new_hardware_cfg)
import json
print(json.dumps(new_hardware_cfg, indent=4))
{
"backend": "quantify_scheduler.backends.qblox_backend.hardware_compile",
"cluster": {
"ref": "internal",
"instrument_type": "Cluster",
"cluster_module1": {
"instrument_type": "QRM_RF",
"complex_output_0": {
"portclock_configs": [
{
"port": "q6:res",
"clock": "q6.ro"
},
{
"port": "q1:res",
"clock": "q1.ro"
}
]
}
}
},
"latency_corrections": {
"q6:res-q6.ro": 4e-09
}
}
3. TransmonElement => BasicTransmonElement¶
from qcodes import Instrument
Instrument.close_all()
from quantify_scheduler.device_under_test.transmon_element import (
BasicTransmonElement,
TransmonElement,
)
transmon = TransmonElement("transmon")
print(f"{transmon.name}: {list(transmon.parameters.keys())}")
print()
basic = BasicTransmonElement("basic")
print(f"{basic.name}: {list(basic.parameters.keys()) + list(basic.submodules.keys())}")
for submodule_name, submodule in basic.submodules.items():
print(f"{basic.name}.{submodule_name}: {list(submodule.parameters.keys())}")
transmon: ['IDN', 'instrument_coordinator', 'init_duration', 'mw_amp180', 'mw_motzoi', 'mw_pulse_duration', 'mw_ef_amp180', 'mw_port', 'fl_port', 'ro_port', 'mw_01_clock', 'mw_12_clock', 'ro_clock', 'freq_01', 'freq_12', 'ro_freq', 'ro_pulse_amp', 'ro_pulse_duration', 'ro_pulse_type', 'ro_pulse_delay', 'ro_acq_channel', 'ro_acq_delay', 'ro_acq_integration_time', 'spec_pulse_duration', 'spec_pulse_frequency', 'spec_pulse_amp', 'spec_pulse_clock', 'acquisition', 'ro_acq_weight_type']
basic: ['IDN', 'reset', 'rxy', 'measure', 'ports', 'clock_freqs']
basic.reset: ['duration']
basic.rxy: ['amp180', 'motzoi', 'duration']
basic.measure: ['pulse_type', 'pulse_amp', 'pulse_duration', 'acq_channel', 'acq_delay', 'integration_time', 'reset_clock_phase', 'acq_weight_type']
basic.ports: ['microwave', 'flux', 'readout']
basic.clock_freqs: ['f01', 'f12', 'readout']
/home/slavoutich/.local/opt/conda/envs/docs_qs0111/lib/python3.9/site-packages/qcodes/instrument/instrument_meta.py:36: FutureWarning: Class quantify_scheduler.device_under_test.transmon_element.TransmonElement is deprecated and will be removed in quantify-scheduler-0.8. Consider replacing with BasicTransmonElement or implementing a custom device element.
new_inst = super().__call__(*args, **kwargs)
spec_str = f'via:\tschedule.add(SpectroscopyOperation("{basic.name}")), not implemented for BasicTransmonElement, see BasicElectronicNVElement.spectroscopy_operation'
convert = {
".IDN": ".IDN",
".init_duration": ".reset.duration",
".mw_amp180": ".rxy.amp180",
".mw_motzoi": ".rxy.motzoi",
".mw_pulse_duration": ".rxy.duration",
".mw_ef_amp180": None,
".mw_port": ".ports.microwave",
".fl_port": ".ports.flux",
".ro_port": ".ports.readout",
".mw_01_clock": f'no longer settable, always "{basic.name}.01"',
".mw_12_clock": f'no longer settable, always "{basic.name}.12"',
".ro_clock": f'no longer settable, always "{basic.name}.ro"',
".freq_01": ".clock_freqs.f01",
".freq_12": ".clock_freqs.f12",
".ro_freq": ".clock_freqs.readout",
".ro_pulse_amp": ".measure.pulse_amp",
".ro_pulse_duration": ".measure.pulse_duration",
".ro_pulse_type": ".measure.pulse_type",
".ro_pulse_delay": "via:\tschedule.add(..., rel_time=...)",
".ro_acq_channel": ".measure.acq_channel",
f'schedule.add(Measure("{transmon.name}", acq_channel=...))': ".measure.acq_channel",
".ro_acq_delay": ".measure.acq_delay",
".ro_acq_integration_time": ".measure.integration_time",
".spec_pulse_duration": spec_str,
".spec_pulse_frequency": spec_str,
".spec_pulse_amp": spec_str,
".spec_pulse_clock": spec_str,
".acquisition": f'via:\tschedule.add(Measure("{basic.name}", acq_protocol=...))',
".ro_acq_weight_type": ".measure.acq_weight_type",
}
transmon_params = [f".{param}" for param in transmon.parameters]
for transmon_param in transmon_params + list(convert.keys() - transmon_params):
basic_param = str(convert.get(transmon_param, None))
print(
f"{transmon.name if transmon_param.startswith('.') else ''}{transmon_param:<42} => {basic.name if basic_param.startswith('.') else ''}{basic_param}"
)
transmon.IDN => basic.IDN
transmon.instrument_coordinator => None
transmon.init_duration => basic.reset.duration
transmon.mw_amp180 => basic.rxy.amp180
transmon.mw_motzoi => basic.rxy.motzoi
transmon.mw_pulse_duration => basic.rxy.duration
transmon.mw_ef_amp180 => None
transmon.mw_port => basic.ports.microwave
transmon.fl_port => basic.ports.flux
transmon.ro_port => basic.ports.readout
transmon.mw_01_clock => no longer settable, always "basic.01"
transmon.mw_12_clock => no longer settable, always "basic.12"
transmon.ro_clock => no longer settable, always "basic.ro"
transmon.freq_01 => basic.clock_freqs.f01
transmon.freq_12 => basic.clock_freqs.f12
transmon.ro_freq => basic.clock_freqs.readout
transmon.ro_pulse_amp => basic.measure.pulse_amp
transmon.ro_pulse_duration => basic.measure.pulse_duration
transmon.ro_pulse_type => basic.measure.pulse_type
transmon.ro_pulse_delay => via: schedule.add(..., rel_time=...)
transmon.ro_acq_channel => basic.measure.acq_channel
transmon.ro_acq_delay => basic.measure.acq_delay
transmon.ro_acq_integration_time => basic.measure.integration_time
transmon.spec_pulse_duration => via: schedule.add(SpectroscopyOperation("basic")), not implemented for BasicTransmonElement, see BasicElectronicNVElement.spectroscopy_operation
transmon.spec_pulse_frequency => via: schedule.add(SpectroscopyOperation("basic")), not implemented for BasicTransmonElement, see BasicElectronicNVElement.spectroscopy_operation
transmon.spec_pulse_amp => via: schedule.add(SpectroscopyOperation("basic")), not implemented for BasicTransmonElement, see BasicElectronicNVElement.spectroscopy_operation
transmon.spec_pulse_clock => via: schedule.add(SpectroscopyOperation("basic")), not implemented for BasicTransmonElement, see BasicElectronicNVElement.spectroscopy_operation
transmon.acquisition => via: schedule.add(Measure("basic", acq_protocol=...))
transmon.ro_acq_weight_type => basic.measure.acq_weight_type
schedule.add(Measure("transmon", acq_channel=...)) => basic.measure.acq_channel
import pprint
device_config_transmon = transmon.generate_device_config().dict()
pprint.pprint(device_config_transmon)
{'backend': 'quantify_scheduler.backends.circuit_to_device.compile_circuit_to_device',
'clocks': {'transmon.01': nan, 'transmon.12': nan, 'transmon.ro': nan},
'edges': {},
'elements': {'transmon': {'Rxy': {'factory_func': 'quantify_scheduler.operations.pulse_factories.rxy_drag_pulse',
'factory_kwargs': {'amp180': nan,
'clock': 'transmon.01',
'duration': 2e-08,
'motzoi': 0,
'port': 'transmon:mw'},
'gate_info_factory_kwargs': ['theta',
'phi']},
'measure': {'factory_func': 'quantify_scheduler.operations.measurement_factories.dispersive_measurement',
'factory_kwargs': {'acq_channel': 0,
'acq_delay': 0,
'acq_duration': 1e-06,
'acq_protocol_default': 'SSBIntegrationComplex',
'clock': 'transmon.ro',
'port': 'transmon:res',
'pulse_amp': 0.5,
'pulse_duration': 3e-07,
'pulse_type': 'SquarePulse'},
'gate_info_factory_kwargs': ['acq_index',
'bin_mode',
'acq_protocol']},
'reset': {'factory_func': 'quantify_scheduler.operations.pulse_library.IdlePulse',
'factory_kwargs': {'duration': 0.0002},
'gate_info_factory_kwargs': None}}}}
import pprint
device_config_basic_transmon = basic.generate_device_config().dict()
pprint.pprint(device_config_basic_transmon)
{'backend': 'quantify_scheduler.backends.circuit_to_device.compile_circuit_to_device',
'clocks': {'basic.01': nan, 'basic.12': nan, 'basic.ro': nan},
'edges': {},
'elements': {'basic': {'Rxy': {'factory_func': 'quantify_scheduler.operations.pulse_factories.rxy_drag_pulse',
'factory_kwargs': {'amp180': nan,
'clock': 'basic.01',
'duration': 2e-08,
'motzoi': 0,
'port': 'basic:mw'},
'gate_info_factory_kwargs': ['theta', 'phi']},
'measure': {'factory_func': 'quantify_scheduler.operations.measurement_factories.dispersive_measurement',
'factory_kwargs': {'acq_channel': 0,
'acq_delay': 0,
'acq_duration': 1e-06,
'acq_protocol_default': 'SSBIntegrationComplex',
'clock': 'basic.ro',
'port': 'basic:res',
'pulse_amp': 0.25,
'pulse_duration': 3e-07,
'pulse_type': 'SquarePulse',
'reset_clock_phase': True},
'gate_info_factory_kwargs': ['acq_index',
'bin_mode',
'acq_protocol']},
'reset': {'factory_func': 'quantify_scheduler.operations.pulse_library.IdlePulse',
'factory_kwargs': {'duration': 0.0002},
'gate_info_factory_kwargs': None}}}}