# Repository: https://gitlab.com/quantify-os/quantify-scheduler
# Licensed according to the LICENCE file on the main branch
"""Schedules intended to verify (test) functionality of the system."""
from __future__ import annotations
import numpy as np
from numpy.typing import NDArray
from quantify_scheduler import Schedule
from quantify_scheduler.operations.acquisition_library import SSBIntegrationComplex
from quantify_scheduler.operations.pulse_library import IdlePulse, SquarePulse
from quantify_scheduler.resources import ClockResource
[docs]
def acquisition_staircase_sched(
readout_pulse_amps: NDArray[np.ScalarType],
readout_pulse_duration: float,
readout_frequency: float,
acquisition_delay: float,
integration_time: float,
port: str,
clock: str,
init_duration: float = 1e-6,
acq_channel: int = 0,
repetitions: int = 1,
) -> Schedule:
"""
Generates a staircase program in which the amplitude of a readout pulse is varied.
Schedule sequence
.. centered:: Reset -- RO_pulse[i] -- Acq[i]
Parameters
----------
readout_pulse_amps
amplitudes of the square readout pulse in Volts.
readout_pulse_duration
duration of the spectroscopy pulse in seconds.
readout_frequency
readout_frequency of the spectroscopy pulse and of the data acquisition in
Hertz.
acquisition_delay
start of the data acquisition with respect to the start of the spectroscopy
pulse in seconds.
integration_time
integration time of the data acquisition in seconds.
port
location on the device where the pulse should be applied.
clock
reference clock used to track the readout frequency.
batched
schedule to be run in batched mode in the hardware backend.
init_duration :
The relaxation time or dead time.
acq_channel
The acquisition channel to use for the acquisitions.
repetitions
The amount of times the Schedule will be repeated.
Notes
-----
This schedule can be used to verify the binning and averaging functionality of
weighted acquisition for readout modules such as a Qblox QRM or a ZI UHFQA.
Because of the overlap between the readout pulse and the integration window, the
change in readout pulse amplitude should show up immediately in the acquired signal.
"""
sched = Schedule(name="Acquisition staircase", repetitions=repetitions)
sched.add_resource(ClockResource(name=clock, freq=readout_frequency))
# ensure readout_pulse_amps is an iterable when passing floats.
readout_pulse_amps = np.asarray(readout_pulse_amps)
readout_pulse_amps = readout_pulse_amps.reshape(readout_pulse_amps.shape or (1,))
for acq_index, readout_pulse_amp in enumerate(readout_pulse_amps):
sched.add(IdlePulse(duration=init_duration))
pulse = sched.add(
SquarePulse(
duration=readout_pulse_duration,
amp=readout_pulse_amp,
port=port,
clock=clock,
),
label=f"SquarePulse_{acq_index}",
)
sched.add(
SSBIntegrationComplex(
duration=integration_time,
port=port,
clock=clock,
acq_index=acq_index,
acq_channel=acq_channel,
),
ref_op=pulse,
ref_pt="start",
rel_time=acquisition_delay,
label=f"Acquisition_{acq_index}",
)
return sched
[docs]
def awg_staircase_sched(
pulse_amps: NDArray[np.ScalarType],
pulse_duration: float,
readout_frequency: float,
acquisition_delay: float,
integration_time: float,
mw_port: str,
ro_port: str,
mw_clock: str,
ro_clock: str,
init_duration: float = 1e-6,
acq_channel: int = 0,
repetitions: int = 1,
) -> Schedule:
"""
Generates a staircase program in which the amplitude of a control pulse is varied.
Schedule sequence
.. centered:: Reset -- MW_pulse[i] -- Acq[i]
Parameters
----------
pulse_amps
amplitudes of the square readout pulse in Volts.
pulse_duration
duration of the spectroscopy pulse in seconds.
readout_frequency
readout_frequency of the spectroscopy pulse and of the data acquisition in
Hertz.
acquisition_delay
start of the data acquisition with respect to the start of the spectroscopy
pulse in seconds.
integration_time
integration time of the data acquisition in seconds.
mw_port
location on the device where the pulse should be applied.
ro_port
location on the device where the signal should should be interpreted.
ro_clock
reference clock connected to hdawg used to track the readout frequency.
mw_clock
reference clock connected to uhfqa used to track the readout frequency.
batched
schedule to be run in batched mode in the hardware backend.
init_duration :
The relaxation time or dead time.
acq_channel
The acquisition channel to use for the acquisitions.
repetitions
The amount of times the Schedule will be repeated.
Notes
-----
The control pulse is configured to be applied at the same frequency as the
acquisition so that it shows up in the in the acquired signal.
This schedule can be used to verify the binning and averaging functionality of
weighted acquisition in combination with the synchronization between the readout
module (e.g., Qblox QRM or ZI UHFQA) and the pulse generating module
(e.g., Qblox QCM or ZI HDAWG).
"""
sched = Schedule(name="AWG staircase", repetitions=repetitions)
sched.add_resource(ClockResource(name=mw_clock, freq=readout_frequency))
sched.add_resource(ClockResource(name=ro_clock, freq=readout_frequency))
# ensure pulse_amps is an iterable when passing floats.
pulse_amps = np.asarray(pulse_amps)
pulse_amps = pulse_amps.reshape(pulse_amps.shape or (1,))
for acq_index, pulse_amp in enumerate(pulse_amps):
sched.add(IdlePulse(duration=init_duration))
pulse = sched.add(
SquarePulse(
duration=pulse_duration,
amp=pulse_amp,
port=mw_port,
clock=mw_clock,
),
label=f"SquarePulse_{acq_index}",
)
sched.add(
SSBIntegrationComplex(
duration=integration_time,
port=ro_port,
clock=ro_clock,
acq_index=acq_index,
acq_channel=acq_channel,
),
ref_op=pulse,
ref_pt="start",
rel_time=acquisition_delay,
label=f"Acquisition_{acq_index}",
)
return sched
[docs]
def multiplexing_staircase_sched(
pulse_amps: NDArray[np.ScalarType],
pulse_duration: float,
acquisition_delay: float,
integration_time: float,
ro_port: str,
ro_clock0: str,
ro_clock1: str,
readout_frequency0: float,
readout_frequency1: float,
init_duration: float = 1e-6,
repetitions: int = 1,
) -> Schedule:
"""
Adds two simultaneous staircases where the amplitudes are varied in opposite order.
The schedule will always use acquisition channels 0 and 1.
Parameters
----------
pulse_amps
Amplitudes of the square readout pulse in Volts. The second staircase will use
this same array in reverse order.
pulse_duration
duration of the spectroscopy pulse in seconds.
acquisition_delay
start of the data acquisition with respect to the start of the spectroscopy
pulse in seconds.
integration_time
integration time of the data acquisition in seconds.
ro_port
location on the device where the signal should should be interpreted.
ro_clock0
Clock used to modulate the first staircase.
ro_clock1
Clock used to modulate the second staircase.
readout_frequency0
readout_frequency of the spectroscopy pulse and of the data acquisition in
Hertz of the first staircase.
readout_frequency1
readout_frequency of the spectroscopy pulse and of the data acquisition in
Hertz of the second staircase.
init_duration :
The relaxation time or dead time.
repetitions
The amount of times the Schedule will be repeated.
Returns
-------
:
The generated schedule.
"""
def add_staircase_step(sched, ref_op, amp, clock, acq_channel, acq_index, delay):
pulse = sched.add(
SquarePulse(
duration=pulse_duration,
amp=amp,
port=ro_port,
clock=clock,
),
ref_op=ref_op,
ref_pt="end",
)
sched.add(
SSBIntegrationComplex(
duration=integration_time,
port=ro_port,
clock=clock,
acq_index=acq_index,
acq_channel=acq_channel,
),
ref_op=pulse,
ref_pt="start",
rel_time=delay,
)
return pulse
sched = Schedule(name="Multiplexing sched", repetitions=repetitions)
sched.add_resource(ClockResource(name=ro_clock0, freq=readout_frequency0))
sched.add_resource(ClockResource(name=ro_clock1, freq=readout_frequency1))
# ensure pulse_amps is an iterable when passing floats.
pulse_amps = np.asarray(pulse_amps)
pulse_amps = pulse_amps.reshape(pulse_amps.shape or (1,))
pulse_amps_reversed = np.flip(pulse_amps)
ref_pulse = sched.add(IdlePulse(duration=init_duration))
for acq_index, (pulse_amp0, pulse_amp1) in enumerate(
zip(pulse_amps, pulse_amps_reversed)
):
add_staircase_step(
sched,
ref_pulse,
pulse_amp0,
ro_clock0,
acq_channel=0,
acq_index=acq_index,
delay=acquisition_delay,
)
ref_pulse = add_staircase_step(
sched,
ref_pulse,
pulse_amp1,
ro_clock1,
acq_channel=1,
acq_index=acq_index,
delay=acquisition_delay,
)
sched.repetitions = repetitions
return sched
