`quantify_scheduler.device_under_test.nv_element`

Device elements for NV centers. Currently only for the electronic qubit, but could be extended for other qubits (eg. carbon qubit).

Module Contents

Classes

`Ports`	Submodule containing the ports.
`ClockFrequencies`	Submodule with clock frequencies specifying the transitions to address.
`SpectroscopyOperationHermiteMW`	Submodule with parameters to convert the SpectroscopyOperation into a hermite
`ResetSpinpump`	Submodule containing parameters to run the spinpump laser with a square pulse
`Measure`	Submodule containing parameters to read out the spin state of the NV center.
`ChargeReset`	Submodule containing parameters to run an ionization laser square pulse to reset the NV in
`CRCount`	Submodule containing parameters to run the ionization laser and the spin pump laser
`BasicElectronicNVElement`	A device element representing an electronic qubit in an NV center.

class Ports(parent: qcodes.instrument.base.InstrumentBase, name: str, **kwargs: Any)[source]

Bases: qcodes.instrument.InstrumentModule

Submodule containing the ports.

microwave[source]: Name of the element’s microwave port.

optical_control[source]: Port to control the device element with optical pulses.

optical_readout[source]: Port to readout photons from the device element.

class ClockFrequencies(parent: qcodes.instrument.base.InstrumentBase, name: str, **kwargs: Any)[source]

Bases: qcodes.instrument.InstrumentModule

Submodule with clock frequencies specifying the transitions to address.

f01[source]: Microwave frequency to resonantly drive the electron spin state of a negatively charged diamond NV center from the 0-state to 1-state Doherty et al. [2013].

spec[source]: Parameter that is swept for a spectroscopy measurement. It does not track properties of the device element.

ge0[source]: Transition frequency from the m_s=0 state to the E_x,y state

ge1[source]: Transition frequency from the m_s=+-1 state to any of the A_1, A_2, or E_1,2 states

ionization[source]: Frequency of the green ionization laser for manipulation of the NVs charge state.

class SpectroscopyOperationHermiteMW(parent: qcodes.instrument.base.InstrumentBase, name: str, **kwargs: Any)[source]

Bases: qcodes.instrument.InstrumentModule

Submodule with parameters to convert the SpectroscopyOperation into a hermite microwave pulse with a certain amplitude and duration for spin-state manipulation.

The modulation frequency of the pulse is determined by the clock spec in ClockFrequencies.

amplitude[source]: Amplitude of spectroscopy pulse

duration[source]: Duration of the MW pulse.

class ResetSpinpump(parent: qcodes.instrument.base.InstrumentBase, name: str, **kwargs: Any)[source]

Bases: qcodes.instrument.InstrumentModule

Submodule containing parameters to run the spinpump laser with a square pulse to reset the NV to the \(|0\rangle\) state.

amplitude[source]: Amplitude of reset pulse

duration[source]: Duration of reset pulse

class Measure(parent: qcodes.instrument.base.InstrumentBase, name: str, **kwargs: Any)[source]

Bases: qcodes.instrument.InstrumentModule

Submodule containing parameters to read out the spin state of the NV center.

Excitation with a readout laser from the \(|0\rangle\) to an excited state. Acquisition of photons when decaying back into the \(|0\rangle\) state.

pulse_amplitude[source]: Amplitude of readout pulse

pulse_duration[source]: Readout pulse duration

acq_duration[source]: Duration of the acquisition.

acq_delay[source]: Delay between the start of the readout pulse and the start of the acquisition.

acq_channel[source]: Acquisition channel of this device element.

class ChargeReset(parent: qcodes.instrument.base.InstrumentBase, name: str, **kwargs: Any)[source]

Bases: qcodes.instrument.InstrumentModule

Submodule containing parameters to run an ionization laser square pulse to reset the NV in its negatively charged state.

amplitude[source]: Amplitude of charge reset pulse.

duration[source]: Duration of the charge reset pulse.

class CRCount(parent: qcodes.instrument.base.InstrumentBase, name: str, **kwargs: Any)[source]

Bases: qcodes.instrument.InstrumentModule

Submodule containing parameters to run the ionization laser and the spin pump laser with a photon count to perform a charge and resonance count.

readout_pulse_amplitude[source]: Amplitude of readout pulse

spinpump_pulse_amplitude[source]: Amplitude of spin-pump pulse

readout_pulse_duration[source]: Readout pulse duration

spinpump_pulse_duration[source]: Readout pulse duration

acq_duration[source]: Duration of the acquisition.

acq_delay[source]: Delay between the start of the readout pulse and the start of the acquisition.

acq_channel[source]: Acquisition channel of this device element.

class BasicElectronicNVElement(name: str, **kwargs)[source]

Bases: quantify_scheduler.device_under_test.device_element.DeviceElement

A device element representing an electronic qubit in an NV center.

The submodules contain the necessary qubit parameters to translate higher-level operations into pulses. Please see the documentation of these classes.